This post will describe the purpose of the Antminer KA3 fan speed percentage as well as how to configure it.
This function is frequently present in the configuration of our mining machines, but many small partners are unsure of its purpose. What should I be aware of when using it, and how do I set it up? We answer these queries below.
1. the Function of the Fan Speed Percentage is Explained.
The fan speed percentage is used to modify the fan speed based on how much of the maximum fan speed is being used. However, it should be noted that the minimum fan speed can only be adjusted to 1000 rpm and that the actual fan speed varies slightly.
2. How to Enable This Function?
All you need to do is click Save after entering the percentage value in the back box and checking the box next to the previous check box. After saving, you need to restart the miner to take effect
3. If This Function is Not Checked, How is the Fan Speed of the Miner Controlled?
The miner’s fan actually defaults to being adjusted automatically based on temperature. Engineers will simulate the ideal fan speed curve when designing the mining machine to make sure it operates at the ideal temperature.
4. What Should I Pay Attention to When Using This Function?
In fact, the default setting is the best choice for automatic fan adjustment, so we do not advise using this function. The fan rotates at a high rate when the temperature is high to improve heat dissipation, and at a low rate when the temperature is low to maintain the temperature. When manually adjusted, if the speed is too low, the miner will get hot; if the speed is too high, the miner’s power consumption will go up; and when the speed is fixed, the miner will be easily influenced by changes in the outside temperature, leading to instability. If it’s not required, uncheck this option.
Please feel free to contact us if you have any questions.
