How to Use Bitmain Antminer KA3 (166Th) on Mining Pools: 2023 Guide

The Bitmain Antminer KA3 (166Th) will be used on mining pools in the manner that this article describes.

The Antminer KA3 from Bitmain is the latest evolution in computer performance on the Kadena algorithm. The Bitmain KDA miner KA3 delivers an extraordinary hash rate performance of 166Th/s for a power consumption of only 3154W.

The KA3 provides a 10-fold computational output improvement, pioneering efficiency and implementing a new industry standard. The KA3 introduces a 19.0J/T demonstrating a balance between performance optimization and energy conservation.

The Bitmain KA3 is the most powerful Blake2s Miner, perfect for mining KDA (The KA3 is the pinnacle of Kadena cryptocurrency mining, providing a convenient and successful mining experience.

Learn how to mine Kadena using your Bitmain Antminer KA3 (166Th) on mining pools by reading the article. As an example, think about the Antpool.

How to Use Bitmain Antminer KA3 (166Th) on Mining Pools

Just follow these easy steps to configure your Bitmain Antminer KA3 (166Th) and mining pool account:

Connecting the Power Supply

1. Power supply APW12 is part of Antminer KA3 server. 
2. Additional two power cords are needed.

Read more: Power-on and Power-off Guidance for the Antminer KA3 Series PSU

Setting Up the Bitmain Antminer KA3 (166Th) for Mining

The web interface for the miner will now be set up.

Log in to your router’s web interface to find the IP address of the AntMiner KA3 (166Th). The miner should be labeled AntMiner in your router interface.

Connect to the web interface

1. Your preferred web browser, such as Chrome, Firefox, etc., should now be open.) and IP address provided.
2. It will ask you to enter a username and password. By default, the AntMiner credentials are root for both, the username and password. Alter the password as soon as you can.

Installing Latest Firmware

Your miner’s data should be summarized once you connect to the web interface. The next step is to install the Antminer KA3 firmware in its most recent iteration.
Download the latest firmware for AntMiner KA3 (166Th)

Install the latest firmware on your AntMiner KA3 (166Th)

1. Select the System tab and move over to the Upgrade child tab.
2. This page shows Restore functionalities and Flash new firmware image.

Your miner is currently secure and has been fully configured. Reading the section after this one will teach you how to configure it for connection with a mining pool.

Connect Bitmain Antminer KA3 (166Th) to a Mining Pool

After successfully updating the firmware to the newest version, you can now use the miner to join a mining pool. As an example, consider Antpool.

1. Obtain miner IP to login to management backend

You can access the management backend after obtaining the miner IP by entering it into your browser (Google or Firefox are recommended) The default username and password are both “root” (in lowercase).

2. Connect to the mining pool and set up miner

Enter the miner’s IP address into the browser once you’ve obtained it. Enter the background of the miner, and set the mining parameters:

KDA:stratum+tcp://kda.antpool.com:8026

Miner: Fill is as “Sub Account.Miner Number”

No changes require (default password is 123 or x)

Verify the data is correct, then save the settings to begin mining.

3. You can check the hashrate and earnings on ANTPOOL after the machine has been running for approximately 10 minutes.

Monitor and Use Bitmain Antminer KA3

Using the Bitmain Antminer on mining pools and monitoring it are both equally important.
In terms of monitoring, the AntMiner web interface comes with easy tooling such as the Kernel Log and Monitor tabs.
Another useful monitoring page is the Monitor status page which shows information on your miner’s status:
On this screen, you can see information about current hashrate, Uptime and current scoring rate.
On the bottom of the screen, you can see information about the speed of fans.

How to Choose a Cryptocurrency Mining Pool

If you are interested in cryptocurrency mining and have made the decision to give it a try, you might consider joining a mining pool where your chances of receiving compensation for your efforts are higher. It can be difficult to choose a mining pool, though, as there are many options and questions to consider.

Learn what to consider when choosing a mining pool, as well as how to choose one.

KEY TAKEAWAYS

• To participate in a mining pool, you might need to invest in specialized, pricey equipment.
• The fairness and openness of mining pools’ operations are crucial.
• Schemes for payouts and fees are necessary because they can reduce your profits.
• The hashrate of the entire mining pool matters more than its size, but you can also evaluate the pool’s credibility based on its size.

Check Best Kadena Mining Pools for Bitmain Antminer KA3.

Summary: USE BITMAIN ANTMINER KA3 (166Th) on MINING POOLS

This concludes our investigation into mining pools’ use of Bitmain Antminer KA3 (166Th) hardware. If you have other mining equipment, such as an AntMiner KA3 (166Th), you can configure it with a mining pool using this example.
Miners frequently offer a web interface to facilitate quick connections to mining pools.
We want you to have fun using this tutorial. Feel free to get in touch with us if you have any thoughts on your Setup experiences!

We sincerely hope that you found this article to be useful, and we are looking forward to your feedback. If you would, kindly comment with your ideas!

FAQs